Q-Logic 59048-02 A manual Post log, Slot slotnumber, Steering domainid, Support

A – Command Line Interface Show Command

Q

	Table A-15. Show Port Parameters (Continued)
Entry		Description
TotalLIPsRecvd		Number of loop initialization primitive frames received by this
		port.
TotalLIPsXmitd		Number of loop initialization primitive frames transmitted by
		this port.
TotalLinkResets		Total number of link reset primitives.
TotalOfflineSeq		Total number of Offline Sequences issued by this port.
TotalRxFrames		Total number of frames received by this port.
TotalRxWords		Total number of words received by this port.
TotalTxFrames		Total number of frames issued by this port.
TotalTxWords		Total number of words issued by this port.
TxLinkResets		Number of Link Resets issued by this port.
TxOfflineSeq		Total number of Offline Sequences issued by this port.
TxWaits		Time waiting to transmit when blocked with no credit.
		Measured in FC Word times.

post log

Displays the Power On Self Test (POST) log which contains results from the POST.

setup [option]

Displays setup attributes for the system, SNMP, and the switch manufacturer. Refer to the ”Show Setup Command” on page A-71.

slot [slot_number]

Displays the hardware attributes for the slot given by [slot_number]. [slot_number] can be 0–12. If you omit [slot_number], the hardware configuration for all slots is displayed.

steering [domain_id]

Displays the routes that data takes to the switch given by [domain_id]. If you omit [domain_id], the system displays routes for all switches in the fabric.

support

Executes a series of commands that display a complete description of the switch, its configuration, and operation. The display can be captured from the screen and used for diagnosing problems. This keyword is intended for use at the request of your authorized maintenance provider. The commands that are executed include the following:

A-54 59048-02 A