Q-Logic 59048-02 A manual Using the Edit Zoning Window

3 – Managing Fabrics Zoning a Fabric

Q

3.4.5

Using the Edit Zoning Window

To edit the zoning database for a particular switch, open the Zoning menu from the faceplate display and select Edit Zoning to open the Edit Zoning window shown in Figure 3-6. Changes can only be made to inactive zone sets, which are stored in flash (non-volatile) memory and retained after resetting a switch.

The Edit Zoning window has a Zone Sets tree on the left and a Port/Device (or members) tree on the right. Both trees use display conventions similar to the fabric tree for expanding and contracting zone sets, zones, and ports. An expanded port shows the port Fibre Channel address; an expanded address shows the port worldwide name. You can select zone sets, zones, and ports in the following ways:

„Click a zone, zone set, or port icon.

„Right-click to select a zone set or zone, and open the corresponding popup menu.

„Hold down the Shift key while clicking several consecutive icons.

„Hold down the Control key while clicking several non-consecutive icons.

Zone Sets	Port/Device
Tree	Tree

Figure 3-6. Edit Zoning Window

After defining zoning changes, choose the OK button to implement those changes and exit the Edit Zoning window. Choose the Apply button to save changes

3-20 59048-02 A