Q-Logic 59048-02 A manual Managing I/O Blades, Section Managing Ports

SANbox2-64 Switch Management User’s Guide

Q

4.5	Paging a Switch	4-13
4.6	Setting the Date and Time	4-13
4.7	Resetting a Switch	4-13
4.8	Configuring a Switch	4-14
4.8.1	Switch Properties	4-15
4.8.1.1	Symbolic Name	4-16
4.8.1.2	Switch Administrative States	4-16
4.8.1.3	Domain ID and Domain ID Lock	4-16
4.8.1.4	Broadcast Support	4-17
4.8.1.5	Inband Management	4-17
4.8.1.6	FC-SW-2 Compliance for Zoning	4-17
4.8.1.7	Legacy Port Address Format	4-18
4.8.1.8	Timeout Values	4-18
4.8.2	Network Properties	4-19
4.8.2.1	IP Configuration	4-20
4.8.2.2	SNMP Configuration	4-21
4.8.2.3	SNMP Trap Configuration	4-22
4.8.2.4	Remote Logging	4-22
4.9	Archiving a Switch	4-23
4.10	Restoring a Switch	4-24
4.11	Managing Firmware	4-26
4.11.1	Installing Firmware	4-26
4.11.2	Activating the Pending Firmware	4-27
4.11.3	Changing the Pending Firmware	4-27
4.12	Restoring the Factory Default Configuration	4-27

Section 5 Managing I/O Blades
5.1	Displaying I/O Blade Information	5-1
5.2	Changing the I/O Blade Administrative State	5-2
5.3	Testing an I/O Blade	5-2
5.4	Resetting an I/O Blade	5-3
5.5	Hot Swap Wizard	5-3

Section 6	Managing Ports
6.1	Displaying Port Information	6-1
6.1.1	Monitoring Port Status	6-2
6.1.1.1	Displaying Port Modes	6-2
6.1.1.2	Displaying Port Operational States	6-3
6.1.1.3	Displaying Port Speeds	6-3
6.1.1.4	Displaying Transceiver Media Status	6-4

Page vi 59048-02 A