Q-Logic 59048-02 A manual Lip Alpd,Alps

Q

6 – Managing Ports Displaying Port Information

Table 6-5. Port Statistics Data Window Entries (Continued)

Entry	Description
Logout Count	Number of device logouts that have occurred on the switch.
Al Init Count	Number of times the port entered the initialization state.
Invalid Destination	Number of address identifier (S_ID, D_ID) errors. AL_PA
Address	equals 0 on FL_Port or non-zero AL_PA found on F_Port.
Total LIP Received	Number of loop initialization primitive frames received.
LIP(f7,f7) Count	A loop initialization primitive frame used to acquire an AL_PA.
LIP(f7,f8) Count	Currently not used.
LIP(f7,AL_PS) Count	This LIP is used to reinitialize the loop. An L_port, identified by
	AL_PS, may have noticed a performance degradation and is
	trying to restore the loop.
LIP(f8,AL_PS) Count	This LIP denotes a loop failure detected by the L_port
	identified by AL_PS.
LIP (AL_PD,AL_PS)	Number of F7, AL_PS LIPs, or AL_PD (vendor specific) resets,
Count	performed.
AL Init Errors	Number of times the port entered initialization and the
	initialization failed. Increments count when port has a sync
	loss.
Class 2 In Frames	Number of class 2 frames received by this port.
Class 2 Out Frames	Number of class 2 frames transmitted by this port.
Class 2 Words In	Number of class 2 words received by this port.
Class 2 Words Out	Number of class 2 words transmitted by this port.
Class 3 In Frames	Number of class 3 frames received by this port.
Class 3 Out Frames	Number of class 3 frames transmitted by this port.
Class 3 Words In	Number of class 3 words received by this port.
Class 3 Words Out	Number of class 3 words transmitted by this port.
Decode Error Count	Number of invalid transmission words detected during
	decoding. Decoding is from the 10-bit characters and special K
	characters.
Loss Of Sync Count	Number of synchronization losses (>100 ms) detected by this
	port. A loss of synchronization is detected by receipt of an
	invalid transmission word.

59048-02 A 6-5