Q-Logic 59048-02 A manual Table A-9. Set Config Port Parameters

A – Command Line Interface Set Config Command

Q

Table A-9. Set Config Port Parameters (Continued)

Parameter	Description
LCFEnable	Link control frame preference routing.
	Enables (True) or disables (False)
	preferred routing of frames with R_CTL =
	1100 (Class 2 responses). The default is
	False. Enabling LCFEnable will disable
	MFSEnable.
MFSEnable	Multi-Frame Sequence bundling. Prevents
	(True) or allows (False) the interleaving of
	frames in a sequence. The default is True.
	Enabling MFSEnable disables LCFEnable
	and VIEnable.
MSEnable	Management server enable. Enables
	(True) or disables (False) management
	server on this port. The default is True.
NoClose	Loop circuit closure prevention. Enables
	(True) or disables (False) the loop’s ability
	to remain in the open state indefinitely.
	True reduces the amount of arbitration on a
	loop when there is only one device on the
	loop. The default is False.
IOStreamGuard	I/O Stream Guard. Enable (Enable) or
	disables (Disable) the suppression of
	RSCN messages. The default is Disable.
VIEnable	Enables (True) or disables (False) VI
	preference routing. The default is False.
	Enabling VIEnable will disable
	MFSEnable.
CheckAlps	Enables (True) or disables (False) the
	loop’s ability to close more often. Enable
	only for TL_Ports that are having problems
	with a specific device. The default is False.

A-34 59048-02 A