Q-Logic 59048-02 A manual Setting SANbox Manager Preferences, Preferences Dialog SANbox Manager

Q

2 – Using SANbox Manager Setting SANbox Manager Preferences

2.7

Setting SANbox Manager Preferences

Using the preferences settings, you can:

„Change the location of the working directory in which to save files

„Change the location of the browser used to view the online help.

„Choose the fabric discovery interval. The fabric discovery interval is how often the SANbox Manager application receives information from the fabric. Choose 30, 45, or 60 seconds.

„Enable or disable the default view file auto save and load feature. Refer to ”Exiting SANbox Manager” on page 2-8for more information on the default fabric view file.

„Enable or disable the use of the Initial Start Dialog at the beginning of a SANbox Manager session. Refer to ”Starting SANbox Manager” on page 2-6for information about the Initial Start Dialog.

„Enable or disable the Event Browser. Refer to ”Displaying the Event Browser” on page 3-9.

„Choose the default port view when opening the faceplate display. You can set the faceplate to reflect the current port mode, port speed, port operational state, or port transceiver media. Refer to the corresponding subsection for more information:

‰”Displaying Port Modes” on page 6-2

‰”Displaying Port Operational States” on page 6-3

‰”Displaying Port Speeds” on page 6-3

‰”Displaying Transceiver Media Status” on page 6-4

Figure 2-6. Preferences Dialog – SANbox Manager

59048-02 A 2-11