Canon AXIS 2110 manual Other Methods of Setting the IP Address, Using the Axis IP Installer

AXIS 2110 User’s Manual Other Methods of Setting the IP Ad- 13

Other Methods of Setting the IP Address

In addition to the ARP command described earlier, you can set the IP address using an appropriate method for your operating system from the table below:

Important!

Ethernet Address: The AXIS 2110 is pre-configured with a unique Ethernet Address based upon the serial number printed on the label on the underside of the unit; where the serial number typically follows the format 00-40-8c-xx-yy-zz. You must know the Ethernet address to complete the installation.

Method	Operating Systems	Refer to...
AXIS IP Installer	Windows 95/98 and	Using the AXIS IP Installer, on page 13.
	NT/2000
DHCP	Most	DHCP, on page 14.
BOOTP	UNIX	Using BOOTP in UNIX, on page 15.
Requiring a BOOTP daemon on your system, this
method operates over the entire network. A
request to an active daemon initiates a search of
the boot table to find an entry matching the unit’s
Ethernet address. The daemon downloads the IP
address to the device if a match is found.

Using the AXIS IP Installer

The AXIS IP Installer is a Windows 95/98 & NT/2000 program that is ideal for setting the IP addresses for multiple Axis’ networking products on your network. Also allowing you to conveniently access the home Web page of any Axis ThinServer device connected to your network, this freely distributed software is available for download from the Axis Website at www.axis.com.

Installing the AXIS IP Installer:

1.Download the latest AXIS IP Installer software onto your desktop and run the Setup_IPInstaller.exe program to start the installation.

2.The AXIS IP Installer - Setup dialog is displayed on the screen.

3.Follow the instructions as they appear on the screen.

4.Click Finish to complete the installation.