Appendix F Technical Specifications | Canon AXIS 2110 instruction

56

Technical Specifications

AXIS 2110 User’s Manual

Appendix F - Technical Specifications

System Requirements - TCP/IP on Windows 95, 98, NT and 2000, as well as Linux, UNIX, Mac and several others. Microsoft Internet Explorer 4.x, or higher (used with Axis’ ActiveX component AXIS Camera Control), or Netscape 4.x or higher.

Network Connection - RJ45 twisted pair cable, or remote connection using any standard serial modem.

Networking - 10baseT Ethernet or 100baseTX Fast Ethernet, TCP/IP, HTTP, FTP, SMTP, NTP, ARP and BOOTP.

I/O Connector - 1 optical-isolated alarm input. 1 digital output (max 24V, 100mA) with programmable digital input/output for remote image storage via FTP or SMTP, pre/post alarm image storage.

Image Updating - Up to 15 frames/second over 10Mbps or 100Mbps networks.

Pre/Post Alarm Buffer - Up to 500kB memory available for pre/post alarm image storage.

Modem Connector - Single 9-pin D-SUB RS-232 connector, max 115 kbps, half duplex

Operating Conditions: - Temp: 40o to 105o F (+5o to +40o C), Humidity: 20-80% RHG.

Approvals - EMC: FCC Class A, EN 55022/1994, EN55024/1998

Safety: EN 60950, UL, CSA.

Metrics: - Height: 1.6” (4.0 cm), Width: 4.1” (10.5 cm), Length: 6.9” (17.5 cm), Weight: 0.56 lb. (0.26 kg) excluding power supply.

Hardware - ARTPEC-1 compression chip; ETRAX-100, including, 32 bit RISC, 100 MIPS CPU, 8 MB RAM, 2 MB FLASH PROM.

Power - External power supply 12V AC, 9.6 VA (PS-D, included), 9-15V AC, min. 10VA, or

9-15V DC, min. 7W.

Image 56

Canon AXIS 2110 manual Appendix F Technical Specifications

Contents

Axis Network Camera Safety Notices Support ServicesAbout This Document Legal Considerations Table of Contents Overview Features and Benefits Complimentary Software Status Indicator Physical DescriptionFront Panel Serial Number Network Indicator Power Supply ConnectorRS-232 Serial Connector Rear Panel Checking the Hardware Inventory Fixing the Axis 2110 to the Mounting AssemblyAssembling Your Camera Installing Your Camera on a Network Quick Installation Procedure❶ Note the Serial number ❷ Assign an IP Address ❹ Attach the external Power Supply ❺ Wait for ARP reply and check Network indicator❻ Exit ping and check the installation ❸ Connect an Ethernet cable Checking the Installation From Your Browser Example Other Methods of Setting the IP Address Using the Axis IP InstallerInstalling the Axis IP Installer Method Operating Systems Refer to Axis IP Installer Setting the IP Address with the Axis IP Installer Dhcp Using Bootp in Unix Mapping a Host Name to the IP AddressPage Using Your Camera with a Modem Using the NetworkUsing the Null Modem Cable Before You Begin Using Your Camera with a Modem Axis 2110 User’s Manual Connecting Your Computer Using the Null Modem Cable ❺ Check the box Don’t detect my Creating a Dial-up Networking Connection ❶ Double-click My Computer and then double-click Refining the Dial-up Networking Properties Initiating the Dial-up Connection Verifying the Modem Connection Configuring Your Camera Configuration Using the Wizards Installation Wizard Overview Starting the Installation WizardApplication Wizard Overview Starting the Application Wizard Administration Tools Accessing the Tools Settings Tools OverviewDescription Applications Wizards Description User Access RightsSystem Security Reinstating the Factory Default Settings Choosing Your Application Networking Applications Resolution Picture frequency for Networking ApplicationsImage Compression Ratios Lighting Conditions Installation and Configuration Overview Viewing Images in a Custom-designed Web Sequentially Uploading Images to a Remote FTP Server Axis 2110 User’s Manual Choosing Your Application Configuration Modem Applications Picture Frequency for Modem Applications Proprietary ISP Dial-up Protocols Remote Imaging in a Custom-designed Web Uploading Images to Your Internet Service Provider ISP Choosing Your Application Axis 2110 User’s Manual ❶Power-on the Axis 2110 and wait 10 seconds Appendix a Lenses and FocusingManual Focusing Focusing using the Focus Assistant Focusing the Camera Under Stable ConditionsFocus Quality Rotational Focus Control Adjust the Tele/Zoom ring to the desired Replacing the Lens CS-C Adaptor if required New lens Appendix B Troubleshooting Frequently Asked Questions Axis PINGing Your IP AddressPing Reply Interpretation and recommendation Problems, Possible Causes and Remedial Actions Symptoms Possible causes Remedial actions No access via the Null Incorrect modem/dial-up Modem Cable Settings SpeedImage resolution and compression Warranty Possible causes Remedial actions Obtaining Updated Software Upgrading the Software Appendix C Updating the Software Appendix D The Unit Connectors Serial ConnectorPhysical Connector Pin IO Connector Digital InputDigital Output Pin Function Connection Diagram for a Simple Door Switch Connection Diagram for an LED indicator Output Mode Power Supply Schematic Connection Diagram of the I/O and RS232 Connector Appendix E High Speed Services Available IP Addresses Axis 2110 User’s Manual High Speed Services Routers and Firewalls Appendix F Technical Specifications Index Dhcp Index Glossary of Terms