10 |
| Installing Your Camera on a Network | AXIS 2110 User’s Manual |
Installing Your Camera on a Network
•Macintosh users - Please refer to Notes for Macintosh Users, on page 16.
•Easy installation - Use The AXIS IP Installer. See Using the AXIS IP Installer, on page 13.
•Quick installation- Follow the instructions below to install the AXIS 2110 on an Ethernet network.
Quick Installation Procedure
Follow the instructions below to quickly install the AXIS 2110 onto an Ethernet network:
Important!
•To install the AXIS 2110 to a modem, see Using Your Camera with a Modem, on page 17
•Do not use the default IP address featured in the following examples when installing your AXIS 2110. Acquire an unused IP address from your Network Administrator.
•Server Privileges: Although no special privileges are required for Windows 95/98, you do need Administrator privileges for Windows NT/2000, and Root privileges on UNIX.
❶Note the Serial number
Note the serial number on the underside of the unit. You need to know this to set the IP address:
Serial number same as Ethernet number; e.g.
00408c100086 =
❷Assign an IP Address
Using an appropriate method for your operating system, you can assign your AXIS 2110 with an IP Address from a computer on your network using the ARP command, as follows:
Windows 95/98 & NT/2000 only - Start a DOS window and type these
commands:
Syntax:
arp
Example:
arp
UNIX only - Type these commands in your command line:
Syntax:
arp
Example:
arp
You will now see the message ‘Request timed out...’, repeatedly returned in the window.
Notes: •In Windows you can find out the IP address of your workstation by running winipcfg (Win 
95/98) or ipconfig (Win NT/2000) from the command line.
•See also Other Methods of Setting the IP Address, on page 13.
