Canon AXIS 2110 manual Physical Description, Front Panel, Status Indicator, Serial Number

AXIS 2110 User’s Manual Physical Description 7

Physical Description

Read the following information to familiarize yourself with the AXIS 2110, making particular note of where the connectors and indicators are located. This information provides a useful reference during the installation of the product.

Front Panel

Status Indicator

Used in conjunction with the Focus Assistant, this multi-colored indicator can be con- figured for use as a local focusing aid (for further details please refer to Lenses and Focusing, on page 39). Under normal conditions however, this indicator shows the oper- ational status of the camera, as described below:

Control Button Located to the left of the lens assembly; this button is recessed within the product cas- ing. Using a suitably pointed object, press this button to restore the factory default set- tings as described in Reinstating the Factory Default Settings, on page 28; or enable the Focus Assistant, as described in Lenses and Focusing, on page 39.

•green - the indicator flashes briefly and momentarily displays orange during the start-up and self-test routines. The indicator then displays green to indicate a healthy unit status.

•red - the indicator will display red only if a problem with the AXIS 2110 has occurred. Refer to Appendix B - Troubleshooting.

Note: The Status indicator also displays orange when re-setting to the factory default settings, as described in Reinstating the Factory Default Settings, on page 28.

Lens Assembly Manual iris Tele/wide zoom lens with rotational focus control.

The supplied lens is removable and can be replaced with any standard C/CS lens.

Serial Number

Located on the underside label of the AXIS 2110, the serial number is identical to the Ethernet address of the unit.

Important!

Although the AXIS 2110 is intended for outdoor and indoor use, it is important to note that the charged coupled device (CCD) in the camera can become permanently damaged if it is exposed to too much direct sunlight, or halo- gen light. Therefore, it is important that the Adjustment Ring is not set fully open when installing the camera in bright light conditions. The Axis warranty does not cover CCD damage caused by prolonged exposure to strong light.