To reset the unit back to the default setting, manually set the Destination Address to 0.0.0.0 or reset the unit to factory de- faults from within the software configuration menu.
When using this feature, have only two Serial Adapters config- ured to Domain 8 on the rotary switch at any point in time. If only one unit is configured for Domain 8, the Pairing Domain will not change the unit’s configuration. If three Serial Adapters are set to Domain 8 and then powered on, the outcome will be unpredictable and may not result in a successful pairing of two of the units.
The Pairing Domain feature is only available when the Domain Switch is in use. This feature is not operational when a Serial Adapter has been configured to Domain 8 from within the software configuration menu or when the Domain Switch setting has been overridden by the software configuration menu.
LED Indicators
There are three LEDs on the top panel of the RangeLAN2 791x Serial Adapter:
❑The Status LED on the right side (with the unit orien- tated so that you can read the Proxim logo), changes colors from yellow (initializing) to green (operational). This LED blinks red in a repeating pattern when a problem occurs with the unit. See Chapter 14 for a further discussion of these patterns.
❑The Radio LED in the center blinks yellow when the Serial Adapter is transmitting data packets over its radio.
22
