2. Quick Installation
You may follow the quick installation and configuration steps if all of the following conditions are true:
❑You will use all of the software default values.
❑You are using two (2) RangeLAN2 Serial Adapters as a replacement for an
❑You are using no more than nine (9) pairs of Serial Adapters in one location.
Follow the steps below to install two RangeLAN2 791x Serial Adapters:
1.Firmly screw the antenna onto its connector in a clock- wise rotation. The antenna connector is located on the side of the unit as shown in Figure 2.
Note:
Government regulatory agencies mandate that the an- tenna not be alterable. Therefore, the RangeLAN2 Serial Adapter uses a custom antenna connector. Do not attempt to use a
5
