Message Format: |
|
BYTE | command (ASCII ‘C’, 43H) |
BYTE | seqno |
BYTE | Radio Channel (1 to 15) |
Set Network Subchannel
Purpose: To set the subchannel of the Serial Adapter’s network protocol.
Response Expected from Serial Adapter: “Subchannel Confirma- tion”
Message Format: |
|
BYTE | command (ASCII ‘S’, 53H) |
BYTE | seqno |
BYTE | subchannel (1 to 15) |
Set Baud Rate
Purpose: To set the baud rate of the Serial Adapter serial line. When the command is received, the Serial Adapter generates the Baud Rate Confirmation message. After that, it then switches to the new baud rate.
Response Expected from Serial Adapter: “Baud Rate Confirma- tion”
Message Format: |
|
BYTE | command (ASCII ‘B’, 42H) |
BYTE | seqno |
BYTE | baudrate (HEX 02 through 0A) |
78
