The StatusInd field does not show whether the destination node has received the message.
Message Format: |
|
|
BYTE | response (ASCII ‘t’, 74H) | |
BYTE | seqno | (from original command) |
BYTE | len H | (from original command) |
BYTE | len L | (from original command) |
BYTE | destaddr H | (from original command) |
BYTE | destaddr 3 | (from original command) |
BYTE | destaddr 2 | (from original command) |
BYTE | destaddr L | (from original command) |
BYTE | StatusInd |
|
The valid values of the StatusInd field are as follows:
00H: Successful Transmission to the TCP/IP stack
01H: Transmission Error
Signal Strength Report
Purpose: This packet is generated by the Serial Adapter in re- sponse to a Request Radio Signal Strength command. The packet contains the signal strength value for the Serial Adapter’s current radio channel. The signal strength value range from 00H to FFH. A value of FFH signifies maximum signal strength.
Message Format: |
|
BYTE | response (ASCII ‘r’, 72H) |
BYTE | seqno (from original command) |
BYTE | Signal strength on current channel |
82
