Proxima ASA 7910, 7911 manual Request Radio Signal Strengths, Request Serial Adapter Version

The four byte address field is the IP address of the destination node. Broadcast addresses (for example, x.y.z.255) can also be used.

Request Radio Signal Strengths

Purpose: To request the Serial Adapter to measure the strength of RF energy on its current radio channel and report the signal strength. The signal strength is reported as an 8-bit value from 00H (minimum signal value) to FFH (maximum signal value).

Response Expected from Serial Adapter = “Signal Strength Report”

Message Format:
BYTE	command (ASCII ‘R’, 52H)
BYTE	seqno

Request Serial Adapter Version

Purpose: To request the physical address and version number of the Serial Adapter. The address is reported as a 4 byte value, only the lower 28 bits of which are meaningful. The version number is reported as a 7 character string.

Response Expected from Serial Adapter = “Serial Adapter Ver- sion Report”

Message Format:
BYTE	command (ASCII ‘V’, 56H)
BYTE	seqno

76