Serial Adapter Version Report
Purpose: This packet is generated by the Serial Adapter in re- sponse to a Request Serial Adapter Version command. The packet contains the
Message Format:
BYTE | response (ASCII ‘v’, 76H) | |
BYTE | seqno (from original command) | |
BYTE | IPaddr H | ;Serial Adapter’s IP Address |
BYTE | IPaddr 3 |
|
BYTE | IPaddr 2 |
|
BYTE | IPaddr L |
|
7 BYTES | string (7 byte ROM version number string) | |
BYTE | Radio Type(03= RangeLAN2 Extended Range) | |
Standby Confirmation
Purpose: This packet is generated by the Serial Adapter after a Go To Standby command is received from the External Com- puter. Immediately after generating this response, the Serial Adapter enters standby mode. The Serial Adapter can only be removed from standby mode by asserting the RTS input signal.
Message Format:
BYTE | response (ASCII ‘g’, 67H) |
Initialization Confirmation
Purpose: This packet is generated by the Serial Adapter after an Initialize Serial Adapter command is received from the External Computer. For convenience, the packet contains the physical address of the Serial Adapter.
83
