AXIS 2110 User’s Manual | Lenses and Focusing | 41 |
1. Adjust the Tele/Zoom ring to the desired | Status Indicator |
|
setting (see illustration on page 39). |
|
|
2. Set the Focus Ring to its extreme
3. Rotate the Iris Adjustment Ring to an appropriate position for your installation, as follows:
Control Button
•indoor scene - fully open (O)
•outdoor scene - mid position (between C and O)
4.Press and hold the Control Button using a paper clip, or any other suitably pointed object (see illustration) - until the Status
Indicator flashes Yellow. This enables the Focus Assistant, sets the Status Indicator to Focus Mode, and simultaneously starts a focusing algorithm that regularly calculates the quality of focus within the camera's field of view.
5.Slowly turn the Focus Ring six
6.Finally, turn the Focus Ring slowly clockwise until the Status Indicator displays Green; that is, until a Good level of focus is achieved. The Status Indicator displays different colors to represent a predefined level of focus (see table below).
7.Return to your browser application and review the picture quality. Repeat step 5 only if you consider the focal distance as too distant - until you are satisfied with both the focal distance and focus quality.
8.To exit the Focus Assistant: press and hold the Control button until the Status Indicator flashes Yellow. The Status Indicator displays Green when the Focus Assistant is closed.
Notes: •The Focus assistant can also be enabled and disabled from the
•A Good level of focus is normally attainable throughout several planes within the camera’s focusing spectrum.
•The Status Indicator displays Green to indicate a Good level of focus at 80% of optimum focus.
•Since optimum focusing is dependent on the camera’s field of view, it is important to scan the focusing plane from the closest to furthest perspectives before attempting any
