Canon AXIS 2110 manual Assembling Your Camera, Checking the Hardware Inventory

AXIS 2110 User’s Manual Assembling Your Camera 9

Assembling Your Camera

The information provided in this section will help you unpack and assemble your product. You will then be ready to proceed with the installation and configuration of the product into your application environment, as described in the following sections of this document.

Checking the Hardware Inventory

Unpack and check all the items against the itemized list below. You should contact your dealer immediately if you find anything is missing or damaged.

Hardware	Model Variants	Part Number
Digital Camera	AXIS 2110	0146-001-01
Null Modem Cable	-	16954
Mounting Assembly	-	15104
Power Supply (PS-D)	Europe	14233
	UK	14234
	Australia	14255
	USA	14253
	Japan	14254
PS-D Extension Cable	3.3 meter	15187
Printed Materials	AXIS 2110 Installation Guide 1.0 (or later)	18819
	AXIS Warranty	18489

Fixing the AXIS 2110 to the Mounting Assembly

Caution!

Although the AXIS 2110 is intended for outdoor and indoor use, it is important to note that the charged coupled device (CCD) in the camera can become permanently damaged if it is exposed to too much direct sunlight, or halogen light. Therefore, it is important that the Adjustment Ring is not set fully open when installing the camera in bright light conditions. The Axis war- ranty does not cover CCD damage caused by prolonged expo- sure to strong light.

The mounting assembly supplied with your AXIS 2110 features a screw head that attaches to the underside of the product. Fasten the AXIS 2110 to the mounting assembly

and position it appropriately for your application. The three holes in the base unit allow the product to be securely fastened to any wall or ceiling.

Note: If you need to mount your camera upside-down, the AXIS 2110 can be easily configured to flip images through 180o.