AXIS 2110 User’s Manual | Lenses and Focusing | 39 |
Appendix A - Lenses and Focusing
The AXIS 2110 features a replaceable
The camera can be focused manually, or with the help of the Focus Assistant. The latter is useful if your AXIS 2110 is located remotely from your viewing workstation. Having positioned the camera, follow the instructions below to focus it.
Important!
Although the AXIS 2110 is intended for both outdoor and indoor use, it is important to note that the charged coupled device (CCD) in the camera can become permanently damaged if it is exposed to too much direct sunlight or halogen light. Therefore, it is important that the Adjustment Ring is not set fully open when installing the camera in bright light conditions. The Axis warranty does not cover CCD dam- age caused by prolonged exposure to strong light.
Manual Focusing
❶Power-on the AXIS 2110 and wait 10 seconds.
❷The Iris Adjustment Ring effectively closes and opens the camera lens to regulate the amount of light entering the camera. Closing the ring reduces the amount of light to pro- duce a better depth of field and focus over a greater distance. Whereas, a more open lens provides better results in
Rotate the Iris Adjustment Ring to an appro- priate position for your chosen installation, as follows:
•indoor scene - fully open (O)
•outdoor scene - mid position (between C and O)
Iris Adjustment Ring
Tele/Wide Zoom Lens
Focus Ring
Status Indicator
Control Button
❸Start your browser application and check the picture. Adjust the Tele/Wide Zoom Lens to a suitable postion for your application.
❹Rotate the Focus Ring to an appropriate posi- ton - until you are satis- fied with the quality of the camera image.
Note: The unit is supplied with the lens set in approximate focus position, with the focus set to 
infinity.
