FARGO electronic II manual Technical Specifications, Print Speed

11

Technical Specifications

58

Printing Method:	Dye-sublimation/resin thermal transfer
Printing Resolution:	300 dpi (11.8 dots/mm)
Colors:	Up to 16.7 million
Print Speed:	Approximately 8 seconds (K)
	Approximately 15 seconds (KO)
	Approximately 30 seconds (YMCKO)
	Additional 45 seconds required if applying PolyGuard
	overlaminate
Printing Area:	Standard CR-80 Card:
	Card Size
	2.13Ó (54mm) x 3.38Ó (86mm)
	Print Area
	1.93Ó (49mm) x 3.1Ó (80.5mm)
	Oversize Card:
	Card Size
	2.36Ó (60mm) x 3.62Ó (92mm)
	Print Area
	2.24Ó (57mm) x 3.5Ó (88mm)
Accepted Card Width:	2.1Ó to 2.63Ó W (53mm to 67mmW)
Accepted Card Length:	3.25Ó to 3.88Ó L (82mm to 98mmL)
Accepted Card Thickness:	.01Ó to .04Ó (.254mm to 1.02mm);
Card Types:	PVC or Polyester cards with polished PVC finish;
	monochrome resin ribbon required for straight polyester
	cards
Card Capacity:	Accepts up to 100 standard CR-80 PVC Cards; auto or
	manual feed
Software Driver:	Windows driver included for IBM-PCÕs and compatibles
Interface:	Standard 8-bit Centronics-type parallel (ECP compatible)
Operating Temperature:	65¼F to 80¼F (18¼C to 27¼C)
Humidity:	Non-condensing 20%Ð60%
Dimensions:	10.44Ó H x 24.79Ó W x 10.94Ó D
	(265mmH x 630mmW x 278mmD)
Weight:	42 lbs. (19 kg)
Agency Listings:	Safety standards: UL 1950, CSA C2.2 and T†V-GS
	(IEC-950); Emissions standards: FCC Class A,
	CRC c1374, Class A and T†V-EMC (IEC-801 -2, -3, -4;
	CISPR 22, Class B) CE
Supply Voltage:	110-120 or 220-240 VAC
Supply Frequency:	50 Hz/60 Hz
Options:	¥ Magnetic Stripe Encoding Module, High and low
	coercivity, Tracks 1, 2, and 3
	¥ CardMaker for Windows software