3
Getting
Started
12
A. Choosing a Good Location
NOTE
B.About Moisture Condensation
C.Unpacking and Inspection
Place the unit in a location with adequate air circulation to prevent internal heat build up.
1.Use the dimensions specified in Section 11 as a guideline for the minimum clearances to the unit.
Allow for adequate clearance above the unit to accommodate the height of the unit with its covers open.
2.Do not install unit (a) near heat sources such as radiators or air ducts, or (b) in a place subject to direct
If the unit is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense inside the unit. Should this occur, print quality may not be optimum. Leave the unit turned OFF in a warm, dry room for several hours before using. This will allow the moisture to evaporate.
While unpacking your printer, inspect the carton to ensure that no damage has occurred during shipping. Make sure that all supplied accessories are included with your unit. The following items should be included with your Color ID Card Printer:
■Printer
■Power Cord
■Cleaning Roller
■Printer Driver Diskette (3.5Ó)
■
■Warranty Statement and Registration Card
■This manual and other printed information
Save the carton and packing materials. They will come in handy when transporting the unit or shipping it for service.
