FARGO electronic II manual Safety Precautions

Before operating the unit, please read the following safety precautions carefully.

Warnings

CAUTION!

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE FRONT, TOP OR BACK PANELS. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

■Operate the unit only on 110-120 VAC, 50/60 Hz. For printers that have been shipped outside of the United States and Canada, operate the unit only on 220-240 VAC, 50/60 Hz. If you have any doubt as to whether you have a unit with the correct voltage rating for your countryÕs power supply, DO NOT ATTEMPT TO USE THE UNIT. Contact your dealer or the factory.

■Stop operation immediately if any liquid or solid object should fall into the cabinet. Unplug the unit and have it checked by qualified service personnel.

■Do not disassemble the cabinet. Refer servicing only to qualified personnel.

■Service personnel: parts of this device may be damaged if exposed to static electrical discharges generated by various means, such as walking on a carpeted floor. To avoid potential damage, always wear an appropriate personal grounding device, such as a wrist strap (w/ integral resistor) connected to an ESD ground. Or, at a minimum, make positive contact with the bare metal chassis of the printer with your hand prior to touching any internal electrical components.

2

Safety Precautions

3