Panasonic KX-TCD410NZ Technical Information

36

Technical Information

Specifications:

•Specifications are subject to change.

•The illustrations used in this manual may differ slightly from the original device.

Connections:

The unit will not work during a power failure. We recommend you connect a standard

telephone on the same line for power protetion.

Standard: DECT=(Digital Enhanced Cordless

Telecommunications)

GAP=(Generic Access Profile)

Number of channels: 120 Duplex Channels

Frequency range: 1.88 GHz to 1.9 GHz

Duplex procedure: TDMA (Time Division Multiple Access)

Channel spacing: 1728 kHz

Bit rate: 1152 kbit/s

Modulation: GFSK

RF Transmission Power: approx. 250 mW

Voice coding: ADPCM 32 kbit/s

Power source: AC Adaptor 220 - 240 V, 50 Hz

Power consumption, base unit: 5 VA

Operating conditions: 5 - 40 °C, 20 - 80 % relative air humidity (dry)

Dimensions, Base Unit: About (58 mm x 128 mm x 105 mm) x 170 g

Dimensions, Handset: About (143 mm x 48 mm x 32 mm) x 120 g

410_NZ_E_04.fm Page 36 Wednesday, April 23, 2003 12:27 PM

Contents

Main Digital Cordless Phone Operating Instructions Preparation Cordless Telephone Useful Information Model No. KX-TCD410NZ Contents Preparation Before Initial Use Important Information Environment Battery Caution Location Safety Caution Connection Battery Installation Battery Charge Battery Life Display icon Battery strength Symbols Used in This Operating Instructions Replacing the Batteries Selecting the Battery Type Location of Controls Handset Handset Display Base unit Wall Mounting Wall Template Using the Telephone Power On/Off Power on Power off Making a Call Pre-dialling Post-dialling 11223 45 6 12 34 Caller ID Service For Using Telecoms or Another Companys Toll Services Caller ID Display Caller ID List Calling Back Editing the Received Number in the Caller List Clearing One/All Received Item(s) in the Caller List Answering Calls Auto Talk 12 3 4 5 (During a call) 2 Storing a Caller Information 23 4 # Z123456789*0 - [] # BVW X Y 78 9 Clearing a Caller Information Dialling with the Phonebook 123 Number Name Storing the Phone Number into the Phonebook When Pre-dialling Storing the Number from the Redial/Caller List into the Phonebook Phone Number Name Hot Key 23 4 1234 : Time Alarm Setting Alarm Time Setting Time Alarm On/Off Time : Ringer Option Setting the Ringer Volume Setting the Ringer Pattern for External Call/Internal Call/Paging/Alarm : Tone Option : Display Option 234 12 3 Selecting the Talk Mode Display Selecting the Display Language : Call Option Call BAR On/Off 4-digit Handset PIN Setting the Direct Call Number Setting the Direct Call On/Off 12 3 New 4-digit Handset PIN New 4-digit Handset PIN again to verify Key Lock 12 3 4 Key Lock On Key Lock Off Recall Feature Dialling Pause (for PBX line/long distance service users) Base Unit Settings 6 Press RIGHT. Press OFF. Changing Base Unit PIN Call Restriction 7 PIN 34 56 7 Cancelling Call Restricted Number Selecting the Flash Timing Pause Timing You can set the pause timing to 3 or 5 seconds, depending on your PBX requirements. Initial Settings : Reset Handset 4-digit Handset PIN You can reset all of the handset settings to their initial settings. Handset Initial Settings Initial Settings Reset Base Unit Settings 4-digit Base Unit PIN If the base unit is reset, the Caller ID list will clear. Base Unit Initial Settings : Handset Registration to a Base Unit Handset Registration displayed.*1 Cancelling a Base Unit You can cancel any base unit that your handset is registered to. 4-digit Handset PIN 4-digit Base Unit PIN Handset Number Before programming, please follow steps 1 to 4. Base Unit PIN*1 12 34 56 89 Handset Numbers 56 7 12 3 4 Intercom Intercom between Handsets Transferring a Call to Another Handset/Conference Call Before Requesting Help Useful Information Technical Information Specifications: Useful Information Index