Manuals / Brands / Communications / Telephone / Panasonic / Communications / Telephone

Panasonic KX-TCD410NZ : Handset Registration to a Base Unit

1 40

Download 40 pages, 2.06 Mb

29

Cordless Telephone

Multi-unit User Operation

: Handset Registration to a Base Unit

Handset Registration

The handset supplied with the base unit is already registered. If an optional handset is

purchased, it must be registered. Additional KX-A142NZ handsets are available to

purchase separately. Up to 6 handsets can be registered to a single base unit. Using

additional handsets allows you to have an intercom call while simultaneously conducting

a call to an outside line.

Handset must be registered within 1 minute after pressing PAGE button. If over 1

minute, press then start over again.

Charge the optional handset batteries for 7 hours before initial use.

•To exit the operation, press any time.

*1The factory preset is 0000.

KX-A142NZ Handset: You can see the illustrations for answering system feature on

additional KX-A142NZ handset body, but KX-TCD410NZ does not have an answering

system feature. Therefore, the answering system does not work even if KX-A142NZ handset

has been registered to KX-TCD410NZ.

Search/Select desired

base unit number

available to register

the handset.

If all registered handsets start ringing (Paging),

press to stop paging then start over again.

When a handset is

registered successfully,

a confirmation tone

sounds and " "

icon lights.

Press and hold on the Base Unit

(for about 5 seconds) until the green indicator flashes.

4-digit Base

Unit PIN after

"BS PIN" is

displayed.*1

Press OK.

4

78

5

6

Press

RIGHT.

Press MENU.Search/Select

"REGISTRATION".

Search/Select

"SETTING HS".

12 3

"REGISTER HS"

410_NZ_E_03.fm Page 29 Wednesday, April 23, 2003 12:02 PM

Contents

Main Digital Cordless Phone Operating Instructions Preparation Cordless Telephone Useful Information Model No. KX-TCD410NZ Contents Preparation Before Initial Use Important Information Environment Battery Caution Location Safety Caution Connection Battery Installation Battery Charge Battery Life Display icon Battery strength Symbols Used in This Operating Instructions Replacing the Batteries Selecting the Battery Type Location of Controls Handset Handset Display Base unit Wall Mounting Wall Template Using the Telephone Power On/Off Power on Power off Making a Call Pre-dialling Post-dialling 11223 45 6 12 34 Caller ID Service For Using Telecoms or Another Companys Toll Services Caller ID Display Caller ID List Calling Back Editing the Received Number in the Caller List Clearing One/All Received Item(s) in the Caller List Answering Calls Auto Talk 12 3 4 5 (During a call) 2 Storing a Caller Information 23 4 # Z123456789*0 - [] # BVW X Y 78 9 Clearing a Caller Information Dialling with the Phonebook 123 Number Name Storing the Phone Number into the Phonebook When Pre-dialling Storing the Number from the Redial/Caller List into the Phonebook Phone Number Name Hot Key 23 4 1234 : Time Alarm Setting Alarm Time Setting Time Alarm On/Off Time : Ringer Option Setting the Ringer Volume Setting the Ringer Pattern for External Call/Internal Call/Paging/Alarm : Tone Option : Display Option 234 12 3 Selecting the Talk Mode Display Selecting the Display Language : Call Option Call BAR On/Off 4-digit Handset PIN Setting the Direct Call Number Setting the Direct Call On/Off 12 3 New 4-digit Handset PIN New 4-digit Handset PIN again to verify Key Lock 12 3 4 Key Lock On Key Lock Off Recall Feature Dialling Pause (for PBX line/long distance service users) Base Unit Settings 6 Press RIGHT. Press OFF. Changing Base Unit PIN Call Restriction 7 PIN 34 56 7 Cancelling Call Restricted Number Selecting the Flash Timing Pause Timing You can set the pause timing to 3 or 5 seconds, depending on your PBX requirements. Initial Settings : Reset Handset 4-digit Handset PIN You can reset all of the handset settings to their initial settings. Handset Initial Settings Initial Settings Reset Base Unit Settings 4-digit Base Unit PIN If the base unit is reset, the Caller ID list will clear. Base Unit Initial Settings : Handset Registration to a Base Unit Handset Registration displayed.*1 Cancelling a Base Unit You can cancel any base unit that your handset is registered to. 4-digit Handset PIN 4-digit Base Unit PIN Handset Number Before programming, please follow steps 1 to 4. Base Unit PIN*1 12 34 56 89 Handset Numbers 56 7 12 3 4 Intercom Intercom between Handsets Transferring a Call to Another Handset/Conference Call Before Requesting Help Useful Information Technical Information Specifications: Useful Information Index