Atlona AT-COMP10SS user manual Specifications, Connection and Operation

SPECIFICATIONS

Inputs	1 x Component Video, 1 x Stereo Audio, 1 x Optical, 1 x S/PDIF
Outputs	10 x RJ45, 1 x Component Video, 1 x Stereo Audio, 1 x Optical, 1 x S/PDIF
Supported Resolutions	all up to 1080p
Video bandwidth	550MHz(-3dB)-loop out and 370Mhz Cat5/6
Distance	1080p @1000ft; 1080i/720p @ 1250ft; 480p @1400ft
Power Consumption (max.)	1.5A
Component Connector	3 x RCA female
Stereo Audio Connector	2 x RCA
S/PDIF Connector	1 x RCA
Optical Connector	Toslink
Power Supply	5V/2A (110/240 universal)
Dimensions (inch)	18.97×6.96×1.73 (Lx W x H) (1U)
Weight	4.1
Operating Temperature Range	-5 to +35°C (-41 to +95 °F)
Operating Humidity Range	5 to 90 % RH (no condensation)

CONNECTION AND OPERATION

1.Connect the Component Source e.g., Cable/Sat receiver, DVD player, Video Codec, switch to the

AT-COMP10SS (transmitting unit)

2.Connect the Component Display e.g., Projector, LCD/LED or a switch to (receiving unit (AT-COMP300RL))

– (receiving unit is sold separately)

3.Terminate the CAT5, 6 or 7 wire with 568B termination and use a tester to make sure all pins are wired correctly before connect it to the VGA10SS transmitter.

4.Connect the power supplies to both transmitter and receiver and the video and in a few seconds the video should appear on the display.

Toll free: 1-877-536-3976	3	www.atlona.com
Local: 1-408-962-0515