Intelligent Motion Systems Modular LYNX System manual V i r o n m e n t a l Specification

Section 10

T h e D i f f e r e n t i a l D i g i t a l I / O M o d u l e

S e c t i o n O v e r v i e w

A LYNX system may contain an optional Differential I/O Module (IMS Part# LX-DD100-000) which provides six (6) high speed differential I/Os. These I/Os can be used as clock inputs or outputs or general purpose I/O. Along with the differential motion I/Os (P1, pins 1 – 4) of the LYNX Control Module, these I/O make up the Group 1 signal set. Each signal pair is a 0 to 5VDC input or output. When used as an input or an output a single ended or differential configuration is accommodated.

!Hardware Specifications

!Environmental Specifications

!Mechanical Specifications

!Power Requirements

!Pin Assignments

!Input Specifications

!Input Filtering

!Output Specifications

H a r d w a r e S p e c i f i c a t i o n s

E n v i r o n m e n t a l S p e c i f i c a t i o n

Ambient Operating Temperature	0 to 50 degrees C
Storage Temperature	-20 to 70 degrees C
Humidity	0 to 90% non-condensing

M e c h a n i c a l S p e c i f i c a t i o n
Dimensions in Inches (mm)
0.9 max	4.39 max
(22.9)	(111.5)
0.39
(9.9)
	3.75
	(95.3)

Figure 10.1 : LYNX Differential I/O Module Dimensions

Modular LYNX System

Modular LYNX System 12.05.2003 1 - 51