DeLonghi Pac 1000 manual Troubleshooting, Problem, Cause, Solution, Technical Assistance

5751009900 17-04-2003 15:07 Pagina 14

Troubleshooting

If the unit is not working properly, this may be due to small problems that you can easily resolve yourself. Follow these instructions carefully before contacting your local De’Longhi Authorized Technical Service Center.

PROBLEM	CAUSE		SOLUTION
The unit does not	• there is no electricity	•	wait
work	• it is not plugged in	•	plug in
	• the function selector is in the “O” position	• move the selector to the desired
	• the timer pin is in the “0” position or it is not		position
	programmed to operate at that moment	•	set the timer to the required
			mode (see turning on the unit and
			programming the timer)
The unit works for	• there is a kink in the outlet tube	• position the outlet tube correctly
only a short time	• the outlet tube is blocked	• check there are no blockages
			preventing the discharge of air
			to the outside
	• there are too many twists in the outlet tube	•	rearrange the tube correctly
			(see set up instructions)
	• the fan is blocked	• contact the Service Center
The tank full light is	• the tank is full activating the safety float	•	empty the tank
on	• the tank is incorrectly positioned	• reposition the tank correctly

The unit works but does not cool the room

• three minutes have not passed since it was		• wait three minutes (safety
	turned on		device)
•	windows open	•	close the windows
• a heat source is operating in the room		•	eliminate heat sources
	(burner, light, etc.) or there are a lot of peo-
	ple
• the air outlet tube has detached from the		• fit the tube in the coupling
	coupling
• thermostat adjusted too high		•	lower the thermostat
•	air filters clogged	•	clean/replace filters

•the cooling capacity of the unit is insuffi- cient for the conditions or size of the room

TECHNICAL ASSISTANCE

Keep the list of Technical Service Centers and

identify the one nearest to you.

RECOMMENDED OPERATING CONDITIONS

Room temperature:	69-90°F
	(21-32 °C)
Outside temperature:	69-109°F
	(21-43 °C)

TECHNICAL SPECIFICATION

Power supply		see rating plate
Max. absorbed power
in air conditioning		“
Refrigerating capacity		see rating plate
Number of fan speeds		2
Dimensions of internal unit:
•	width	18”
•	height	31,50”
•	depth	16”
•	weight	72,8 lbs.

14