2 – Using SANbox Manager

Changing the SANbox Manager Default Fabric File Password

Q

2.5

Changing the SANbox Manager Default Fabric File Password

To change the password for the default fabric view file, do the following:

1.Open the File menu and select Change Default File Password to open the Set New Password dialog as shown in Figure 2-5.

Figure 2-5. Set New Password Dialog – SANbox Manager Fabric File

2.Enter the new password in the Default File Password field.

3.Re-enter the same password in the Re-enter Password to Confirm field.

4.Choose the OK button to save the changes.

2.6

Saving and Opening SANbox Manager Fabric View Files

In addition to the SANbox Manager default fabric view file, you can save and open your own fabric view files. To save a set of fabrics in a fabric view file, do the following:

1.Open the File menu and select Save View As to open the Save View dialog.

2.Enter a name for the fabric file or choose the Browse button to select an existing file. Files are saved in the working directory.

3.Enter a password. When you attempt to open this fabric file, you will be prompted for this password. If you leave the File Password field blank, no password will be required.

To open a fabric view file, do the following:

1.Open the File menu and select Open View File to open the Open View dialog.

2.Enter a name for the fabric file or choose the Browse button to select an existing file.

2-10

59048-02 A

Page 22
Image 22
Q-Logic 59048-02 A manual Changing the SANbox Manager Default Fabric File Password