Xerox DocuPrint 96MX manual OS9210 Parity error on input medium

		OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS9210		Parity error on input medium.
		A parity error has been discovered in the magnetic tape input buffer
		in CPU memory. (The error was not reported by the magnetic tape
		drive itself.)
		or
		The message also appears if attempting to read a 6250 bpi tape on
		a 1600 bpi magnetic tape drive.
	Action	1. Clean the magnetic tape drive. (Refer to the maintenance
		chapter in your DocuPrint 96/DocuPrint 96MX LPS Operator
		Guide.)
		2. Check the tape density.
		3. Restart the job and/or mount a tape of correct density for the
		tape drive.
		4. If the problem continues, contact your systems specialist or
		Xerox Customer Service.
OS9300		Page set-up error. Page won‘t be printed. ABORT O or
		The page cannot be printed because a dispatching error has
		occurred three consecutive times. This may be due to data
		exceeding the capability of the character dispatcher. (Message is
		followed by message OS2000.)
		The printer control console displays:
		OUTPUT STOPPED. SEE MESSAGE AT CRT.
	Action	1. Enter the CONTINUE O command. The job will print with one
		page missing.
		or
		Enter the ABORT O command to cancel the report.
		2. Recreate the job, reducing the amount of data per page.
		Note: CRT refers to the DocuPrint 96/DocuPrint 96MX LPS
		System controller display.
OS9305		Duplex set-up error. Page won‘t be printed. ABORT O or
		The page cannot be printed because the front side of a page printed
		on both sides (duplex) contains more data than can be retrieved and
		set up by the system. (This message is followed by message
		OS2000.)
	Action	1. Enter the CONTINUE O command for the job to print with one
		page missing.
		or
		Enter the ABORT O command to cancel the report.
		2. Recreate the job, reducing the amount of data per page.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-125