HIP (HOST INTERFACE PROCESSOR) MESSAGES

HP1207 Offline pending end of current active xns session

The HIP OFFLINE command was entered. The printer will disconnect from Ethernet when the current session is terminated.

Action None.

HP1210

Host online. Accepting all jobs

 

The HIP ONLINE ALL command was entered. The printer and

 

remote host are communicating, and the host is sending jobs to the

 

HIP buffer. All print and nonprint files (fonts, forms, or JSLs) will be

 

accepted.

Action

Enter the HIP START command at the system controller keyboard to

 

initiate printing.

HP1220

Host online. Accepting print jobs only

 

The HIP ONLINE command was entered. The printer and the remote

 

host are communicating, and the host is sending jobs to the HIP

 

buffer. Only files to be printed will be accepted.

Action

Enter the HIP START command at the system controller keyboard to

 

initiate printing.

HP1230 Host offline

The HIP OFFLINE or RESET command was entered. The printer and remote host are no longer communicating.

Action None.

HP1240

Host not responding

 

The HIP START command was entered but the host is not online and

 

communicating with printer. (This message is displayed every 30

 

seconds until the host comes online or the interface is terminated.)

Action

1.

If using Ethernet, verify that the connection is good and that the

 

 

printer network address and network number are correct.

 

2.

If using XPAF, contact your systems specialist or Xerox

 

 

Customer Service.

 

3.

If the failure recurs, call for service.

HP1242

Online interface waiting for communications

 

HIP is online to the XPAF host and waiting for communications.

Action

None.

 

 

HP1246

Receiving communications from host

 

The host has established the data communications link.

Action

None.

4-6

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE

Page 28
Image 28
Xerox DocuPrint 96MX HP1207 Offline pending end of current active xns session, HP1210 Host online. Accepting all jobs