Xerox DocuPrint 96MX manual HIP host interface processor messages

4.HIP (host interface processor) messages

	These messages may appear on your system controller display if
	printer communications have been established through the host
	interface processor (HIP). The HIP chapters in your DocuPrint 96/
	DocuPrint 96MX LPS Operator Guide and DocuPrint 96/DocuPrint
	96MX LPS Operations Reference provide detailed information on
	HIP.
HP0010	Host interface processor unloaded
	The HIP command was entered. HIP task is activated and ready to
	receive jobs.
Action	None.
HP0020	Host interface processor unloaded
	The HIP END command was entered. HIP task is deactivated.
Action	Wait for the system to print any files stored in the HIP buffer.
HP0030	Logging enabled
	You have entered the HIP LOG [START] command. The system has
	enabled the logging of selected XNS operations.
Action	None
HP0031	Logging disabled
	You have entered the HIP LOG [STOP] command. The system is
	telling you that it has disabled the logging of selected XNS
	operations. You can disable selected XNS operations for the purpose
	of record capturing.
Action	None.
HP0080	Concatenated job operator display mode is ‘ON’
	In response to an operator command, HIP will display internal job
	status while in a concatenated job mode.
Action	None.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 4-1