Xerox DocuPrint 96MX HP2160 Enter ‘HIP show log continue’ for more, HP2210 File send not allowed

	HIP (HOST INTERFACE PROCESSOR) MESSAGES
HP2160	Enter ‘HIP show log continue’ for more
	There are more than 20 entries in the log and you must enter HIP
	SHOW LOG CONTINUE to view additional screens.
Action	None.
HP2165	Insufficient disk space for log files.
	You have entered HIP LOG [START]. There is insufficient disk space
	to begin logging.
Action	Delete home files to create space for logging procedures.
HP2200	Rejected nonprint file transfer
	An unacceptable nonprint file was sent; therefore, the system did not
	store it. (Acceptable file types are those specified in the ACCEPT
	command in HIP.LIB.)
Action	Edit HIP.LIB and add the file extension to the ACCEPT=command.
HP2210	File send not allowed
	The file SEND command is not permitted.
Action	None.
HP2220	File specified to send does not exist
	The file requested to be sent does not exist.
Action	Verify that the file name is correct and retry the command.
HP2230	File send request rejected by host
	The request to send a file cannot be processed.
Action	Make sure the host is in a state to receive files, and retry the
	command.
HP2240	Send request rejected by queue saturation
	HIP SEND was rejected due to a “queue full” condition.
Action	Wait until jobs have printed, then reenter the HIP SEND request.
HP2290	Pass-through pending, enter ‘HIP START.’
	or
	Pass-through pending, select or enter ’HIP START.’
	A pass-through job has been sent from the XPAF host; HIP must be
	started.
Action	None.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 4-11