Grundig GLCD4000HD, GLCD4600HD manual Specification, Displayable Monitor, Horizontal, Vertical

RGB Mode / HDMI Mode

MODE	Resolution	Horizontal	Vertical
		Frequency (KHz)	Frequency (Hz)
	640X350	31.5	70.0
DOS	720X400	31.5	70.0
		37.9	85.0
		31.5	60.0
VGA	640X480	37.8	72.0
		37.5	75.0
		43.2	85.0
		35.1	56.0
		37.9	60.0
SVGA	800X600	48.0	72.0
		46.9	75.0
		53.7	85.0
		48.4	60.0
XGA	1024X768	56.4	70.0
		60.0	75.0
		60.0	85.0
		63.9	60.0
SXGA	1280X1024	75.0	70.0
		79.9	75.0
		91.1	85.0
		47.7	60.0
	1280X768	60.1	75.0
WXGA		68.5	85.0
	1360X768	49.0	60.0
	1366X768	49.0	60.0
UXGA	1600X1200	75.0	60.0

(Synchronization input form : separate)

Note:

a.If the set is cold, there may be a small “flicker” when the set is switched on. This is normal, there is nothing wrong with the set.

b.If possible, use the VESA 1,024x768@60Hz video mode to obtain the best image quality for your LCD monitor. If used to PC vertical frequency 85Hz, some noise can be seen when PIP is on. In this case, set the PC vertical fre- quency to 60Hz. The set has been pre-adjusted to the mode VESA 1,024x768@60Hz.

c.Some dot defects may appear on the screen, like Red, Green or Blue spots. However, this will have no impact or effect on the monitor performance.

d.Do not press the LCD screen with your finger for a long time as this may produce some temporary distortion effects on the screen.

e.When the PC screen appears on the set, a message may appear on the screen, and the message will differ according to the Window system version (Win98, 2000). If a message appears click “Next” until the message fin- ishes.

f.If the message “Out Of Range” appears on the screen, adjust the PC as in the ‘Displayable Monitor Specification’ section.

Specification

Displayable Monitor

EN

43