Xerox DocuPrint 96MX manual OS1550 Space or move function stopped by end of data

	OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS1540	Cannot space past start of job
	One of the following commands was entered:
	MOVE n BLOCKS
	MOVE n FILES
	SPACE n PAGES
	SPACE n REPORTS
	The system has reached the beginning of a job and cannot space
	backward any farther.
Action	None.
OS1550 Space or move function stopped by end of data
	One of the following commands was entered:
	MOVE n BLOCKS
	MOVE n FILES
	SPACE n PAGES
	SPACE n REPORTS
	The system cannot space or move forward over any more text
	because no more data has been input.
Action	None.
OS1551	Inappropriate disk file type specified
	An incorrect disk file type has been entered.
Action	Check the file type and reenter it correctly. (Refer to your
	DocuPrint 96/DocuPrint 96MX LPS Operations Reference chapter
	on managing LPS resources for additional information.)
OS1552	File does not exist
	The file name entered has not been input or stored on system disk.
Action	1. Verify the file name and reenter it correctly.

2.If the message reappears, load the desired file to system disk. (Refer to your DocuPrint 96/DocuPrint 96MX LPS Operations Reference chapter on managing LPS resources for additional information.)

OS1553 Insufficient file space for status/accounting

The CJF ACCOUNTING command was entered. Not enough disk space remains to create a 2000 report file.

Action	1.	Delete files to create more disk space.
	2.	Compress disk. (Refer to your DocuPrint 96/DocuPrint 96MX
		LPS Operations Reference chapter on managing LPS
		resources for additional information.)
	3.	Reenter the accounting command.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-31