Xerox DocuPrint 96MX manual HP2344 Cannot change job does not exist

	HIP (HOST INTERFACE PROCESSOR) MESSAGES
HP2344	Cannot change: job does not exist.
	The jid specified does not exist in the HIP job queue.
Action	None.
HP2345	Cannot change: output file already exists
	The file specified is already resident on the disk.
Action	Rename the output file and retry the CHANGE command.
HP2346	Command not allowed on system UI.
	This message is in response to a service-oriented command which
	creates a display that the system PC-UI is not capable of handling.
Action	Use a LINK terminal to execute this command.
HP2400	HIP interface must be offline. Enter ‘HIP OFF’
	The HIP DIAGNOSTIC command was entered. HIP must be offline
	to perform diagnostics.
Action	1. Enter the HIP OFFLINE command.
	2. Reenter HIP DIAGNOSTIC.
HP2410	Abort current transmission; confirm with ‘Y’
	This message is a confirmation prompt appearing after the HIP
	ABORT command was entered.
Action	1. Enter Y to abort the job
	or
	2. Enter N if abort is not desired.
HP2420	Defer hip diagnostic until OCS queue idle
	The HIP DIAGNOSTIC command was entered while a job was
	queued or being processed. The command is being ignored.
Action	1. Wait until all jobs print.
	or

2.Enter the ABORT job command to cancel the job (if only one remains).

or

3.Enter the RESET command to delete all jobs.

4.Reenter the HIP DIAGNOSTIC command to proceed with diagnostics.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 4-13