Xerox DocuPrint 96MX manual IF2250 Medium must be tape or cartridge, IF2330 Character x not found

IFU (INTERPRESS FONT UTILITY) MESSAGES

IF2250	Medium must be tape or cartridge.
	Magnetic tape or cartridge are the only media possible for the ADD
	command (some commands do not accept floppy disks).
Action	Reenter the command specifying either magnetic tape or cartridge.

IF2304	Font profile name is required in ADD command
	The ADD command must contain the desired font profile name.
Action	Reenter the ADD command, to include the applicable font profile
	name.

IF2306	Font profile x cannot be opened
	The requested font profile cannot be opened.
Action	1.	Verify that the font profile exists on the system and that it is not
		corrupted.
	2.	Reenter the ADD command.

IF2318	Nonnumeric resolution parameter
	The resolution of the font must appear numerically as 300 or 600 (spi)
	in the IPFONTS or DCFONTS statement of the font profile.
Action	1.	Correct the IPFONTS or DCFONTS statement using “300” or
		“600” as the resolution parameter in the font profile.
	2.	Reenter the ADD command.

IF2324 Pt size x and orient y were not requested; skipping ADD

The expected point size and orientation have not been requested, and the ADD command will not be processed.

Action None.

IF2330	Character x not found
	The character shown in the message cannot be found within the FIS
	font master.
Action	1. Verify that the character requested within the font profile is the
	desired character.

2.Reenter the ADD command.

3.If the message reappears, contact your systems specialist or Xerox Customer Support.

IF2332 Composite request (character x) requires RIP

The composite character requested in the font profile requires RIP (raster image processor), which is not on your system.

Action None.

5-12 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE