Xerox DocuPrint 96MX Parity error while receiving, Transmit queue full, Invalid ESS signal ID

	DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES
567	Parity error while receiving
	The user interface does not use this feature of RS232.
Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.

568Transmit queue full

The communication driver’s transmit queue is full.

Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.
569	Can’t kill Terminal Emulation Mode timer
	The TEM (terminal emulation mode) timer is not active or cannot be
	turned off. Probably the result of an internal PC user interface error.
Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.
570	Invalid ESS signal ID
	The system controller signal indicator is out of range. May mean
	outdated PC user interface software or a protocol error.
Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.
571	Invalid Acknowledge parameter
	The system controller transmitted a character that is invalid in the
	current context. It can only be ACK, NACK, or start-of-packet.
Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.
572	Can’t send SM_OBJ message
	The message used to notify the system of incoming system controller
	data could not be placed on the PC user interface message queue.
Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.

573Invalid paper status update

The contents of the PAPER signal is not valid.

Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 15-7