Xerox DocuPrint 96MX manual Run font through fix on CD/IG Version 2 or higher, Scaling bitmap

SCALE COMMAND MESSAGES

	**Run font through fix on CD/IG Version 2 or higher**
	The font must be modified through the FIX command before scaling.
Action	1. Enter the appropriate FIX command. (Refer to your DocuPrint
	96/DocuPrint 96MX LPS Operations Reference chapter on
	managing LPS resources for additional information.)
	2. Reenter the SCALE command.
	3. The following “FONT FILE xxxx CANNOT BE SCALED...”
	messages indicate that the resulting font or logo file exceeds
	the capacity of the file format.
	**FONT FILE, xxxx, CANNOT BE SCALED (BITMAP
	SIZE)**
	**FEATURE NOT IMPLEMENTED: 600 -> 300 SCALING**
	**FONT FILE, xxxx, CANNOT BE SCALED (ALIGNMENT
	FIELD)**
	**FONT FILE, xxxx, CANNOT BE SCALED (yBYTES
	FIELD)**
	**FONT FILE, xxxx, CANNOT BE SCALED (xBITS
	FIELD)**
	**FONTS FILE, xxxx, CANNOT BE SCALED (FMA
	FIELD)**
	**FONT FILE, xxxx, CANNOT BE SCALED (ESCAPEMENT
	FIELD)**

Scaling bitmap.

The font or logo bitmap is being scaled.

Action None

Scaling font: xxxx to: yyyy

The requested font is being scaled to the name shown in the message.

Action None

Scaling form: xxxx

The requested form is being scaled.

Action None

Scaling FST entry.

The font or logo specification table is being scaled. Action None

11-6 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE