Xerox DocuPrint 96MX manual OS1830 Printing 1 copy of current report

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS1830 Printing 1 copy of current report

The “PRINT 1” option was selected in response to “Disk saturation” message OS6300 or OS2871. Multiple-copy printing of the current report has discontinued and the system is printing one copy.

Action None.

OS1835 Printing all copies of report in sections

The CONTINUE I command was entered in response to “Disk saturation” message OS6300. The system is continuing multiple- copy printing of current job by sections.

Action None.

OS1840 Printing all copies of report so far, ending job now

The ENDJOB command was entered in response to “disk saturation” message OS6300. The system is printing the current report copy and will stop printing the job when that copy is completed.

Action None.

OS1850 Job started at end of data, nothing found to print. Enter ‘CON I’ or ‘CON JDE,JDL’ to start next report

No data exists for the job number entered. The job has already printed, was not sent, or the tape was not rewound.

Action Press the Rewind button or enter the REWIND command to rewind the tape.

or

Mount the desired job tape.

or

Send a job from the host.

OS1860 Endjob ignored, no data remains to be printed

The ENDJOB command was entered after printing was completed. The command is being ignored.

Action None.

OS1910 This function of input not implemented

A command was entered relating to an input function not available on your system

Action None.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-39