Xerox DocuPrint 96MX CP Compress command messages, CP1010 Compress now restoring the print file

1.CP (COMPRESS command) messages

	These messages may appear during the process of compressing the
	system disk. (Refer to your DocuPrint 96/DocuPrint 96MX LPS
	Operations Reference chapter on managing LPS resources for
	additional information.)
CP1010	Compress now restoring the print file
	The COMPRESS command was entered. The process has moved
	the print file to different area of the system disk.
Action	None
CP1020	Now processing DP0
CP1030	Now processing DP1
CP1040	Now processing DP2
CP1050	Now processing DP3
	The COMPRESS command was entered. The system is currently
	compressing the indicated disk pack unit.
Action	None.
CP1800	Compress processor aborting
	The ABORT command was entered during the compress process.
	The system disk remains partially compressed.
Action	None.
CP1900	Insufficient working memory for compress
	Not enough dynamic memory exists for the compress process.
Action	Contact your systems specialist or Xerox representative regarding
	obtaining additional memory capacity.
CP2010	Enter ‘A’ to abort or ‘C’ to compress other disks
	Multiple disks IDs were specified in the COMPRESS command. One
	of the system disks contains so many files that there is not enough
	internal memory to load the COMPRESS task.
Action	Enter A to abort compression.
	or

Enter C to skip over the full disk and compress others specified in

COMPRESS command.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 1-1