Xerox DocuPrint 96MX manual IF2412 Point size was not found in Dcfonts statement

IFU (INTERPRESS FONT UTILITY) MESSAGES

IF2410	Orientation parameter was not found in DCFONTS statement
	Orientation (i.e., PORTRAIT, LANDSCAPE, IPORTRAIT, and
	ILANDSCAPE) has not been specified in the DCFONTS statement in
	the font profile.
Action	1.	Correct the DCFONTS statement to include the desired
		orientation parameter.
	2.	Retry the ADD command.

IF2412	Point size was not found in DCFONTS statement
	Point size is not specified in the DCFONTS statement of the font
	profile.
Action	1.	Reenter the DCFONTS sequence to include point size.
	2.	Retry the ADD command.

IF2414	Files parameter was not found in DCFONTS statement
	No FILES parameter is specified in the DCFONTS statement in the
	font profile.
Action	1.	Correct the DCFONTS statement to include the FILE
		parameter.
	2.	Retry the command.

IF2416	DCCHARS parameter x was not found in DCFONTS statement
	The indicated DCCHARS parameter is not included in the DCFONTS
	statement of the font profile.
Action	1.	Correct the DCFONTS statement to include the DCCHARS.
	2.	Retry the command.

IF2420	Label missing on MAP statement
	The MAP statement in the font profile must contain a label.
Action	Reenter the MAP statement to include a label.
IF2422	Character mapping table x was not found
	The character mapping table needed for the font to be added does
	not exist in IPFNTS.SYS.
Action	1. Compile the correct IPFNTS.JSL with the needed mapping
	structure.
	2. Retry the ADD command.
IF2426	Point size x was not found in easy values
	The point size requested is not contained within the FIS font master.
Action	None.

5-14 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE