Xerox DocuPrint 96MX manual Unable to allocate memory for file view

	DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES
3539	Creation of Console Log File failed
3540	Read Console Log File Header failed
3541	Write Console Log File Header failed
3542	Reset Console Log File Header failed
	For message numbers 3539, 3540, 3541, or 3542, the create, read,
	write, or reset console log file operation you have tried has failed due
	to a hardware problem.
Action	1. Check disk drive to ensure that DOS formatted console log disk
	is inserted in disk drive, if applicable.
	2. Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service to investigate possible
	hardware disk failure.
3548	Unable to allocate memory for file view
	There is not enough memory to allocate for file view.
Action	1. Ensure that the UI hardware memory is properly configured and
	available.

2.Ensure memory is not being committed to other purposes, like a RAM drive.

3.Select the OK header button to retry the process. If the problem persists, call Xerox Customer Service.

3549	Unable to allocate memory for Console Log write buffer
	Unable to allocate memory for use in writing entries in console log.
Action	1.	Restart the PC user interface hardware from Power On.
	2.	Ensure no other Microsoft Windows applications are running.
	3.	Select the OK header button to retry the process. If the problem
		persists, call Xerox Customer Service and provide the UI Crash
		Log, if installed.

3550	Unable to read last Console Log Data record
	Unable to read last record from console log.
Action	1. Check disk drive to ensure that console log disk is inserted in
	disk drive, if applicable.

2.Save the console log to a different name for later diagnoses, then empty the original console log.

3.Select the OK header button to retry the process. If the problem persists with new log, call Xerox Customer Service to investigate possible hardware disk failure.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 15-13