Xerox DocuPrint 96MX IF7914 IPM input from file x, block y, failed, IF7916 IPM package error

		IFU (INTERPRESS FONT UTILITY) MESSAGES
IF7914	IPM input from file x, block y, failed
	The system failed in an attempt to read a block from an IPM file. The
	file is either corrupted or does not exist on the system.
Action	1.	Delete the IPM files on the system.
	2.	Recompile IPFNTS.SYS to recreate this file.
	3.	If the problem continues, contact your systems specialist or
		Xerox Customer Service.
IF7915	IPM more than 1000 files are needed for x
	Allocation is being attempted from the free blocks list but there are
	not enough free blocks to store the family. On the one-thousandth
	file, this allocation will fail due to file sequence wraparound.
Action	None.
IF7916	IPM package error
	IPM would not open. The IPM file is either missing from the system
	or is corrupted.
Action	1.	Delete the IPM files on the system.

2.Recompile IPFNTS.SYS to recreate this file.

3.If the problem continues, contact your systems specialist or Xerox Customer Service.

IF7930	Error occurred while reading decomposed FIS file.
	A disk input/output error occurred while the system was accessing an
	internal temporary file.
Action	1.	Reenter the ADD command.
	2.	If the problem continues, contact your systems specialist or
		Xerox Customer Service.

IF7931	Error occurred while accessing the CMT block
	An IFU internal error has occurred.
Action	None.
IF8101	CMT calling sequence error x
	The character mapping table is being processed out of sequence.
Action	Contact your systems specialist or Xerox Customer Service.
IF8102	CMT storage request has failed
	The amount of storage space requested is too large.
Action	Contact your systems specialist or Xerox Customer Service.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 5-31