Xerox DocuPrint 96MX manual OS Level 6 Job integrity, OS6005 Invalid Ethernet tape preamble format

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS Level 6: Job integrity

	Identifies possible errors affecting output and what action(s), if any,
	to take.
OS6000	Insufficient memory for ‘ACCTINFO’; Continue or Abort?
	JSL specified the ‘ACCTINFO’ option of the RSTACK command.
	There is not enough dynamic memory for it.
Action	1. Enter the CONTINUE command, or press the <CON> key to
	print the job without delimiter sheets.
	or
	Enter the ABORT job command to cancel the job.
	2. Recreate the job, reducing the number of features.
OS6005	Invalid Ethernet tape preamble format.
	Information in the Ethernet tape header (preamble) is missing or
	incorrectly formatted. Job will not print.
Action	Recreate the job tape, ensuring that the data is formatted correctly.
	(Refer to Xerox LPS Tape Formats Manual.)
OS6006	Invalid Ethernet print procedure message.
	The Ethernet tape contains an incorrect sequence of bytes
	describing procedures for printing. The job will not print.
Action	Recreate the tape, ensuring that the print procedures information is
	formatted correctly. (Refer to Xerox LPS Tape Formats Manual.)
OS6007	Ethernet tape job from this host type not supported.
	The Ethernet tape contains information for which no PDL statement
	exists and, therefore, cannot be incorporated into a JSL (e.g.,
	packing information). The tape cannot be used.
Action	None.
OS6008	Problem with Ethernet tape, checksum failed, check tape.
	The Ethernet tape has apparent data loss. The job will not print.
Action	Check the tape at the host to determine where the problem exists;
	recreate the tape ensuring that data is complete. (Refer to Xerox LPS
	Tape Formats Manual.)

6-86 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE