Xerox DocuPrint 96MX manual FCG Exiting Invalid Profile-Output or input not specified, Valid

DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES

FCG Exiting: Invalid Profile—Output or input not specified

The profile requires OUT135 prior to parameter 1 to determine if these values are to be used for an output profile. if OUT135 has not been included in the specified profile, the following message is displayed:

Action None.

FCG Exiting: Invalid profile—too many parameters.

You have exceeded the acceptable number of parameters allowed in the profile.

Action None.

	FCG Exiting: Invalid profile—not enough parameters.
	You have specified too few parameters in the profile.
Action	None.
	FCG Exiting: PVNUM.SYS not present on system
	Necessary information for the FCG SHOW command is not in the
	system.
Action	None.
	FCG Exiting: Profile for %0 successfully loaded
	The profile you have requested has been found and its parameters
	have been loaded.
Action	None.
	FCG Starting: Version: %0
	You have entered a correct profile label. The appropriate version
	number is also displayed.
Action	None.
	File cannot be accessed . . . .
	The file is too large for the PC Editor to process.
Action	If the file is an ESS file, use EDI in the message window.
	File could not be emptied or deleted. Ensure that the filename is
	valid.
	An incorrect file name may have been entered, or the file name does
	not exist.
Action	1. Check the file listing of the window you are working in for the
	correct file name.
	2. If the problem persists, contact your systems specialist.

15-38 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE