Xerox DocuPrint 96MX manual OS1590 Generating Ethernet error, OS1600 Input task not active

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS1585	Can‘t read message file. No Ethernet error page printed
	The system cannot print the error page at the end of the Ethernet-
	transmitted report because the required message file is missing.
Action	Contact your systems specialist or Xerox Customer Service.

OS1590	Generating Ethernet error page
	Errors exist in an Ethernet-transmitted job. The system is compiling
	error page to be printed at end of the job.
Action	1.	Check the Ethernet error page for the location of errors in the
		job.
	2.	If desired, recreate the job.

OS1600 Input task not active

The STOP I command was entered when input was already inactive (i.e., no job had been sent or started.)

Action None.

OS1610 Output task not active

The STOP O command was entered or the Stop button was pressed while the system was not printing.

Action None.

OS1620 Local density problem has caused a printer cycle down

A page was encountered with a local density problem; i.e., it contains a line or lines that are too complex for the system to process normally. The printer is cycling down to rasterize (produce a bitmap image of) the page.

Action None.

OS1625	Local density problem rasterization in progress
	A page with a local density problem is being rasterized for printing;
	i.e., the system is producing a bitmap image of the page.
	Note: This may take from 3 to 20 minutes.
Action	Do not press any keys until the process is complete (Message
	OS1627 appears).

OS1627 Local density problem rasterization complete

A page with a local density problem has been rasterized; i.e., a bitmap image of the page has been produced. The printer will now cycle up and print the problem page.

Action None.

6-34 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE