Xerox manual Numbered DocuPrint 96/DocuPrint 96MX LPS messages

DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES

Numbered DocuPrint 96/DocuPrint 96MX LPS messages

	Messages 7 through 36
	Messages 7 through 36 appear when serious User Interface software
	problems occur. For all of these messages, call for Xerox service.
	Messages 41 and 42
41	At least one of the main UI windows did not create
	Microsoft Windows cannot create a window required by the SysUI.
	This may be due to a corrupt sysui.exe file, a coding error, or lack of
	Windows resources.
Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.
42	Failure of Unformat ESS Message
	A message received from the system controller failed to properly
	unformat.
Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.
	Messages 44 through 48
	Messages 44 through 48 appear when serious User Interface
	software problems occur. For all of these messages, call for Xerox
	service.
	Message 538
	Message 538 is a result of problems/warnings/status that could occur
	during the processing of messages and signals/interrupts from the
	system controller (ESS) or during the sending of commands to the
	system controller.
538	Error writing to ESS
	Writing to the system controller communication port failed while in
	TEM (terminal emulation mode).
Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.
	Messages 540 and 541
	Messages 540 and 541 appear when serious User Interface software
	problems occur. For both of these messages, call for Xerox service.
	Messages 544 through 574
	Messages 544 through 574 are the result of problems/warnings/
	status that could occur during the processing of messages and
	signals/interrupts from the system controller (ESS) or during the
	sending of commands to the system controller.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 15-3