Xerox DocuPrint 96MX manual OS6920 Line exceeded page limit. Line truncated

		OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS6920	LINE exceeded page limit. Line truncated.
	A new margin has taken effect or a new line was started. Current line
	length is longer than page size. The excess has been cut off.
Action	1.	Check the JDL/DJDE MARGIN commands and change the
		margin size.
	2.	Ensure that the correct paper size was specified at sysgen.
	3.	If the problem recurs, recreate the job, changing line length,
		font size, and/or carriage returns.
OS6949	Page density exceeded, page won‘t be printed. ABORT O or.
	The page being imaged has too many characters per line. The page
	will not print. (Message is followed by message OS2000.)
	The printer control console displays:
	OUTPUT STOPPED. SEE MESSAGE AT CRT.
Action	1.	Enter the CONTINUE O command to resume printing if data

loss is acceptable. or

Enter the ABORT O command to cancel the job.

2.Recreate the job, reducing the amount of overprinting and/or shading.

OS6950	LINE density exceeded, page won‘t be printed. ABORT O or.
	The page being imaged has too many characters per line. The page
	will not print. (Message is followed by message OS2000.)
	The printer control console displays:
	OUTPUT STOPPED. SEE MESSAGE AT CRT.
Action	1. Enter the CONTINUE O command to resume printing if data
	loss is acceptable.
	or
	Enter the ABORT O command to cancel the job.
	2. Recreate the job, reducing the amount of overprinting and/or
	shading.
OS6951	Unable to rasterize local density problem page.
	An imaging error occurred while attempting to rasterize a page with
	a local density problem. The page cannot be rasterized; i.e., a bitmap
	image of the page cannot be produced.
Action	None.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-107