Xerox DocuPrint 96MX manual PR2600 Not enough space on disk to hardcopy

PR (HARDCOPY GRAPHICS PRINTING COMMAND) MESSAGES

PR2600	Not enough space on disk to hardcopy.
	The selected file cannot be hardcopied because the print file is not
	large enough to hold it
Action	1.	Use the REALLOCATE command to enlarge the print file.
		(Refer to your DocuPrint 96/DocuPrint 96MX LPS Operations
		Reference chapter on setting LPS parameters for additional
		information.)
	2.	Reenter the HARDCOPY command.

PR2710	Scale factor invalid, check and retry.
	The “n/d” scale parameter of the HARDCOPY command was entered
	incorrectly.
Action	Reenter the command correctly. (Refer to your DocuPrint 96/
	DocuPrint 96MX LPS Operations Reference chapter on running print
	jobs.)

PR2720	HPOS value out of range, check and retry.
	The number entered for horizontal position (hpos) parameter of
	HARDCOPY command was beyond the permitted range.
Action	Reenter the command correctly. (Refer to your DocuPrint 96/
	DocuPrint 96MX LPS Operations Reference chapter on running print
	jobs for additional information.)

PR2730	VPOS value out of range, check and retry.
	The number entered for the vertical position (vpos) parameter of
	HARDCOPY command was beyond the permitted range.
Action	Reenter the command correctly. (Refer to your DocuPrint 96/
	DocuPrint 96MX LPS Operations Reference chapter on running print
	jobs for additional information.)

PR2760	File not found, check and retry.
	The file specified in the “file name” parameter of HARDCOPY
	command does not exist on system disk.
Action	1. Verify the desired file name and reenter the command.

2.If the message reappears, load the desired .IMG file to disk. (Refer to your DocuPrint 96/DocuPrint 96MX LPS Operations Reference chapter on setting LPS parameters for additional information.

9-2 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE