8.PG (PURGE command) messages

These messages may appear during process of purging disk or print file. Refer to your DocuPrint 96/DocuPrint 96MX LPS Operations Reference for detailed information about the PURGE command.

PG0100 Processing the entire disk.

The PURGE D command was entered. The system is clearing all unused areas of the disk, including the print file.

Action None

PG0110 Purging entirely the following disks:

The listed system disk drives will be purged including any applicable print files.

Action None

PG0200 Processing the Print File only.

The PURGE P command was entered. The system is clearing the print file only.

Action None

PG0210 Purging the Print Files.

The PURGE command will remove unwanted data from the print files.

Action None

PG0215 Purging Print File.

The PURGE command is removing unwanted data from the user’s print file.

Action None

PG0216 Purging Raster Print File.

The PURGE command is removing unwanted data from the print file used for rasterization.

Action None

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE

8-1

Page 217
Image 217
Xerox DocuPrint 96MX manual PG Purge command messages